How To Colorize Black and White Image In Photoshop

How To Colorize Black and White Image In Photoshop

How To Colorize Black and White Image In Photoshop

Today I’m going to show you best way  to colorize black and white image in Photoshop easily.

Open a black and white photo you like to use for this project. First we’re going to isolate areas of your subject by making selections around those areas there are many ways to make selections however i’ll use the quick selection tools.

I’ll start by isolating the background from my subject by dragging my tool over my subject to select it, to remove areas of the selections press and hold alt key as you drag over those areas continue to drag your tool of your subject until it’s all selected.

colorizeblackec-1-min

To check your selection press Q to make into a quick mask, then press Q again to revert it back into a selection.

colorizeblackec-2-min
colorizeblackec-3-min

Then go to Refine Edge, Check Smart radius, drag the radius to the right a bid as well as smooth to make your tool bigger or smaller you can adjust it top of the brush size. Drag your tool over the edges of your subject where you’d like to refine the quick mask then click Ok. Press ctrl or command shift I to invert the selection.

colorizeblackec-4-min

Click the adjustment layer icon and click solid color. Instantly the selection became the shape inside the layer mask of solid color pick the color you want for your background once you rick your color click ok.
colorizeblackec-5-min
colorizeblackec-6-min

Change the blend mode to multiply reduce it’s opacity to a map looks good to you.

colorizeblackec-7-min

Make your photo active and drag the quick selection tool over another part of your selection i’m selecting the hair. Click the refine edge and check smart radius drag to the radius to right a bit as well as smooth.
colorizeblackec-8-min

Click the adjustment layer icon again and as before click solid color once again your new selection became the shape inside the layer mask and choose the color and click ok. This time change the blend mode to color then reduce it’s opacity to a map that looks good to you

colorizeblackec-9-min
colorizeblackec-10-min

To colorize another area of your subject make your subject active and drag your quick selection tool over that area open refine edge if you check remember setting just click ok, repeat the same steps as you did earlier by clicking the adjustment layer icon and checking solid color pick a color and ok change it’s blend mode overlay or color depending on which looks better to you. Then reduce it’s opacity.
colorizeblackec-11-min
colorizeblackec-12-min

Continue to repeat these steps for all other areas you going to colorize.

To enhance an area with soft airbrush color will make a composite snapshot of our image first scroll to the top of your layers panel make the top layer active and press Ctrl+Shift+Alt+E.

colorizeblackec-13-min

open your brush tool and brush picker we’ll adjust the brush size make your hardness 0% the opacity 33% and change it’s blend mode to color. Click your foreground color and pick a color you want to brush in. then gently brush in the color.
colorizeblackec-14-min

To pick another color to click foreground color to pick another color. And then Layer> Flatten Image

colorizeblackec-15-min

Now you successfully colorized a black and white image..

If You Have Any Question About This Please Comment.

We offer our services in every aspect of editing the photos such as Removing Backgrounds, Photo Retouching, Enhancing the Photo,Photo Restoration, Photo Processing, Amazon Photo editing services, Clipping Path  services, Photo Collage,Masking, Cropping, Resizing  Jewelry retouching, Raw/Jpg color correction and a lot more. In short, we offer any kind of services related to photo editing which you are looking for. The expert and highly professional team of Expert Clipping is confident in saying that we will shape your photo according to your imagination and we will provide you any kind of photo editing service.

Join our FacebookYoutubeGoogle+Twitter page to learn more video

How To Quickly Create Stylish Pop Art Portraits From Images In Photoshop

How To Quickly Create Stylish Pop Art Portraits From Images In Photoshop

How To Quickly Create Stylish Pop Art Portraits From Images In Photoshop

Today i’m going to show you how to easily create pop art portraits from photos, open a photo you like to use.

The first step is to crop your image, Open your crop tool and delete the amount in the width field. Keep it empty for the height, type 870 pixel and for the resolution, type in 150 pixels per inch.

popartec-1-min

Drag any of the crop boundaries in or out to crop your image. Then click the check mark at the top. Or press enter .

popartec-2-min

 

Next you convert your image into a Smart Object, so you can modify it non-destructively as well as allow you to change or adjust all the filter that you’ll be adding to it. Click the icon at the upper, right up the Layers panel and click “Convert to smart Object”.

popartec-3-min

Make 2 copies of the layer by pressing ctrl+j twice. Name the top layer “cutout” next layer “Hard Light” and the bottom layer “Stamp” Click the eyeball icons of the top two layer to temporarily hide them.

popartec-4-min

Go to filter and Filter Gallery. Open the Sketch Folder and click stamp. For this example I’ll make the “Light/Dark Balance” 7 and “Smoothness” 1 however, feel free to adjust this amount. Remember because your image is smart object, you can change or adjust the filter at any time.

popartec-5-minpopartec-6-min

Make the middle layer visible and active. Change its blend mode to “Hard Light”

popartec-7-min

Make the top layer visible and active. Go back to “Filter” and “Filter Gallery” . Close the Sketch Folder and open the “Artistic” folder. Click “CutOut” I’ll make the Number of Levels: 7 Edge Simplicity: 7  and the Edge Fidelity: 2 then click OK.

popartec-8-min

Change its blend mode to multiply. To change the shapes of the colors and theirs amount, double click the “Filter Gallery” in the top layer to open back up the “Cut Out” Filter. Have fun experimenting with the amount.
popartec-9-min

If your image is too dark, as this example, to lighten it Shift-click the bottom layer to make all the layers active and merge them into a smart object.

popartec-10-min

Go to image, Adjustment and “Shadows/Highlight” the shadows amount default 35%, however, feel free to adjust this amount then click ok.
popartec-12-minpopartec-12-min

To increase the colors vibrancy, click the adjustment layer icon and click “Vibrance” I’ll drag the vibrance all the way to the right.

popartec-13-minpopartec-14-min

Using this technique you can create your photo stylish and pop art portraits.
Please Like Us, Comment And Share This

If You Have Any Question About This Please Comment.

We offer our services in every aspect of editing the photos such as Removing Backgrounds, Photo Retouching, Enhancing the Photo,Photo Restoration, Photo Processing, Amazon Photo editing services, Clipping Path  services, Photo Collage,Masking, Cropping, Resizing  Jewelry retouching, Raw/Jpg color correction and a lot more. In short, we offer any kind of services related to photo editing which you are looking for. The expert and highly professional team of Expert Clipping is confident in saying that we will shape your photo according to your imagination and we will provide you any kind of photo editing service.

Join our FacebookYoutubeGoogle+Twitter page to learn more video

How To Quickly Transform Image In Photoshop

How To Quickly Transform Image In Photoshop

How To Quickly Transform Image In Photoshop

Image enhancement services can enhance a very normal and dull image to look it like a professional and best quality image. These services have the capability to give your ordinary shots a look of digitally attractive and alluring picture. Image enhancement services involve the adjusting of saturation, balancing the colors, increasing or decreasing contrast to a satisfactory level, infusing appealing brightness, adjusting the density level, applying the appropriate filters, removing or inserting the beautiful backgrounds, cropping and removing blemishes and other such things which enhance the quality level of an image to make it much better.

Today I’m going to show you how to give your photos a dreamy, romantic effect and then and text to it to personalize them.

This effect, especially well on portraits.

Open a photo you like to use, First click the Adjustment Layer icon and choose “Gradient Map” change the blend mode to screen.

effectec-1-mineffectec-2-min

Click the Gradient bar which open the Gradient Editor. Click the Violet/Orange preset, these colors works well with most photos.

effectec-3-min

But for this example i’ll tweak them a bit, click the lower left Stops the color box and type in “32224C” then click ok, and click the lower right Stops the color box and type in “F8A658” then press enter or return.

effectec-4-min

Click the adjustment layer again and this time choose “Levels” Drag the black a little left and where the histogram starts to rise this will slightly darken the darkest color. Drag the input mid tones to the left to lighten them.
effectec-5-min

Click the new layer icon to make a new layer and open your brush tool, choose the large brush, depending size & resolution of your photo, make the Hardness 0% then enter.

effectec-6-min

Click the Foreground color and type in “FFD43D” and OK

effectec-7-min

Press B to open your brush tool, turned off you caps lock key otherwise you won’t be able to see your brush on your screen now left click once next to your subject’s head. And change the blend mode to screen.

effectec-8-min

Now we’ll add the bokeh lights to further enhance overall effect. Open a bokeh file like you and press ctrl and c to copy it open back up your photo and press ctrl+v to paste the bokeh light into your document.

effectec-9-min

To transform the bokeh lights to the vertical angle and to increase its size press ctrl+t to open your transform tool go to a corner and when you see a straight double arrow hold down shift and drag it out until completely covers your document press enter or return.

effectec-10-min

Again change the blend mode to “Screen”

effectec-11-min

Open your horizontal type tool and pick a handwritten font, check size smood and left

Alignment and choose the color like you. Type out your main text, to reposition it open your move tool and move it.

effectec-12-min
effectec-13-min

Now You Give Your Photo Dreamy Romantic Effect And Text..

Please Like Us, Comment And Share This

If You Have Any Question About This Please Comment.

We offer our services in every aspect of editing the photos such as Removing Backgrounds, Photo Retouching, Enhancing the Photo,Photo Restoration, Photo Processing, Amazon Photo editing services, Clipping Path  services, Photo Collage,Masking, Cropping, Resizing  Jewelry retouching, Raw/Jpg color correction and a lot more. In short, we offer any kind of services related to photo editing which you are looking for. The expert and highly professional team of Expert Clipping is confident in saying that we will shape your photo according to your imagination and we will provide you any kind of photo editing service.

Join our FacebookYoutubeGoogle+Twitter page to learn more video

How to make Realistic Shadow In Photoshop

How to make Realistic Shadow In Photoshop

How to make Realistic Shadow In Photoshop

Drop Shadow / Shadow Creation Service / Natural Shadow / Product Photo Reflection

A good quality drop shadow is characterized with a smooth texture and the ability of the visual to look authentic. Since this effect needs to be raised above the background, it is imperative that the background has the right canvas- hence, the need to change the setting to suit the feature.

Today i’m going to show you how to make realistic shadows in your photos.

Shadows commonly separate out in it is setting this additionally returning the item by it is thematic,  they generally become a bit lighter and softer.

I’ll also show you how to position the shadow to a subject whose base is a regular.

First, you need to make a selection around the shape of the object and cut and paste onto its own layer. There are many ways to make selections so choose the method that’s the easiest and most effective for you.
shadowbgec-1-min

Once you have your object on its own layer make a copy of it by pressing ctrl+j make the original layer active.
shadowbgec-2-min

And then press ctrl+t to open your transform tool, go to the top middle and press and hold ctrl or command as you drag it down at an angle that takes into account the position and angle of the source of the light on your subject.
shadowbgec-3-min

To re position it click inside the transform and move it, then press enter and return.
shadowbgec-4-min

Just go to the right of lock, click on the lock transparent pixels icon.
shadowbgec-5-min

Now open your gradient tool and click on the arrow next to the horizontal gradient bar click on the third box which is the black to white gradient. Make sure the linear gradient is highlighted.

shadowbgec-6-min

Go to the bottom of your object and drag the line above it’s top click.
shadowbgec-7-min

Click back on the icon to unlock it change blend mode to multiply.
shadowbgec-8-min

Next we need to blur the shadow but before we do that i want to show you how to get to this point in a subject whose bottom is a regular. Notice the shadow doesn’t match up with it’s subject. shadowbgec-9-min

Click on edit and puppet warp.
shadowbgec-10-min

Click on the point of each shadow that you want to be matched in position with its subject, then pull on the pin and drag it to the bottom of its subject. You can also rotate the pin by pressing and holding alt option and then rotate it. When you’re happy with the  shadows position and angle press enter and return.
shadowbgec-11-minshadowbgec-12-min

Last step blurring its shadow, first we blur the base open your Rectangular Marquee tool and drag out a rectangle across the top half of the shadow click on Refine Edge and feather required bit i’m choosing 250 pixels the OK.
shadowbgec-13-minshadowbgec-14-min

Now go to Filter Blur and Gaussian Blur and for the top half of the shadow upload approximately 20 pixels, again you may adjust this number for yours press ctrl+d to delete the selection.

shadowbgec-15-minshadowbgec-16-min

Lastly  i want to reduce the shadows capacity so I’ll enter 80%. And then Layer>Flatten Image. 

shadowbgec-17-minshadowbgec-18-min

Using This Technique You Can Cast Realistic Looking Shadows From Any Object.

Please Like Us, Comment And Share This,

If You Have Any Question About This Please Comment.

We offer our services in every aspect of editing the photos such as Removing Backgrounds, Photo Retouching, Enhancing the Photo, Photo Restoration, Photo Processing, Amazon Photo editing services, Clipping Path  services, Photo Collage,Masking, Cropping, Resizing  Jewelry retouching, Raw/Jpg color correction and a lot more. In short, we offer any kind of services related to photo editing which you are looking for. The expert and highly professional team of Expert Clipping is confident in saying that we will shape your photo according to your imagination and we will provide you any kind of photo editing service.

Join our FacebookYoutubeGoogle+Twitter page to learn more video

How To Retouch Image In Photoshop

How To Retouch Image In Photoshop

How To Retouch Image In Photoshop

High-End Jewelry Retouching / Model Retouching / Product Retouching

Open a photo of a face that you’d like to retouch. The First step is to make 2 copies of the photo by pressing ctrl+j twice on the layer.

I create two layer is high frequency texture and low frequency blur, click off the eyeball next to the top layer to temporarily hide it.
retouchecbg-1-min

And go to Filter>Blur>Gaussian Blur.

retouchecbg-2-min

Drag the slider until it blurs the skin just enough to hide most pores and bitchiness then click OK.
retouchecbg-3-min
Make the top layer visible and active. Go to Image and apply image.

retouchecbg-4-min

For the source layer, click “ Low Freq Blur” and for the Target Blending mode click “Subtract” The Scale is 2 and Offset is 128. Then click OK.
retouchecbg-5-min

Change the Blend mode to Linear Light at this point your photo looking the same as before.
retouchecbg-6-min

Make the middle layer active. Zoom into areas of the face by pressing “z” to open your zoom tool and drag it over the place.

Open you lasso tool and draw the selection over the inside of your skin. You’ll feather it, so edges will be soft. For you, the best way to preview the feathering is the click the Refine Edge button or go to Select and Refine Edge.
retouchecbg-7-min

Drag the Feather slider to the right, until it’s blurred approximately this much. The actual pixel amount of yours, may be very different than mine depending on your photos size and resolution. Remember your pixel amount and click Cancel. retouchecbg-8-min

At the top, in the feather field, type in that amount.

retouchecbg-9-min

Deselect it by pressing Ctrl+D. To apply the Feathering draw another selection inside the skin. And go to Filter, Blur and Gaussian Blur. Slide the blur Radius to an amount that makes the bitchiness disappear. The texture remains because it’s on a different layer Click OK.
retouchecbg-10-min

Now you’re just concerned with removing the bitchiness and overall inconsistencies.

Draw another selection around the cheek and make sure you don’t get too close to the eyes, hair, lips and neck. Press Ctrl+F to repeat the last filter you used, which was Gaussian Blur. the delete the selection.
retouchecbg-11-min

If you want to finesse it more by removing tiny spots of texture imperfections, zoom into the area you want to finesse the area by pressing Ctrl Plus key and drag your subject to the area you want to finesse. Make your High Freq texture active again and this time you’ll open your “Spot Healing Brush Tool”
retouchecbg-12-min

Make you brush bid larger than the spot your want to remove and simply click the brush over the spot. Continue to click or brush over other tiny, texture imperfections until the entire face is flawless.
retouchecbg-13-min
retouchecbg-14-min

Thanks for seeing it. I’ll show you another tutorial in my next lesson on adobe Photoshop you’re invited to see it

Photo Retouching is an excellent technique that helps you to touch specific and undesirable factor into your image. You can easily adjust any object or element and even a human figure or all forms of surplus elements neatly using the Photoshop pen tool with Clipping Path service as the term clearly dictates its function. Overall progress has done, but Photo Retouching is the final step to enhancing the image or image frame greater than normal one.

Expert Clipping  is one of the best image editing companyphoto editing services which has a large number of professional image editors working specially for it. These image editors have been selected after examining a lot of different images edited by them and it has been noticed that Image background removing  is one of those areas in which these professional image editors of Expert Clipping are extremely good. As it has already been told that Image background removing is not an easy work to do but in fact it is a very complicated process which involves a great attention and concentration along with a great experience.

Join our FacebookYoutubeGoogle+Twitter page to learn more video

How To Cut Out Hair From Image In Photoshop

Cut Out Hair From Image In Photoshop

How To Cut Out Hair From Image In Photoshop

Today i’m going to show you how to cut out every single hair from your image by using this method.

First of all i’d like to use my quick selection tool as you can see the top of your tool palette And make of selection like you.

cutouthairec-1-min

If you made a selection of her body properly, but the hair doesn’t have to accurate like. The basic of the selection would work just fine.

cutouthairec-2-min

Once this thing is has select your Add Vector Mask option for mirror and click bottom of your layer. It will apply a layer mask. 

cutouthairec-3-min

If you actually see the image properly go to and create a solid layer from Create new fill or adjustment layer>Solid Layer And choose a color you like it. Now put this under your layer so now you can see your chosen solid color in your image background

cutouthairec-4-mincutouthairec-5-mincutouthairec-6-min

Now you can see your background color fringing and her hair doesn’t look really good after that you need to select your mask not the image, then right click on that and select refine mask now the refine mask first of all check the option smart radius  after that make the radius full 100% actually it 250% and after that you need to still get rest of the remaining hair’s like you.

cutouthairec-7-mincutouthairec-8-min

Now click this option Decontaminates Color and give it sometime night it doesn’t do anything, to take it right way and you can got rid of that and it’s looks like magic. And now you can hit ok, and you can explore further options.
cutouthairec-9-mincutouthairec-10-min

Now bitter reality and if you don’t how this kind of different layer after hitting OK. Here’s the trick right click refine mask whenever you hit OK make sure this layer mask option selected and then it OK.
cutouthairec-11-min

And you completely remove the every single hair from images like you, and you can delete the solid color layer from your layer bar and you can add another image in your background like you.

cutouthairec-12-min
cutouthairec-14-min

Thanks for seeing it. I’ll show you another tutorial in my next lesson on adobe Photoshop you’re invited to see it,

If you have any question please comment…

How To Cut Out Hair From Image In Photoshop Video

Expert Clipping  is one of the best image editing companyphoto editing services which has a large number of professional image editors working specially for it. These image editors have been selected after examining a lot of different images edited by them and it has been noticed that Image background removing  is one of those areas in which these professional image editors of Expert Clipping are extremely good. As it has already been told that Image background removing is not an easy work to do but in fact it is a very complicated process which involves a great attention and concentration along with a great experience.

Join our FacebookYoutubeGoogle+Twitter page to learn more video

Remove background from image Use Magic Wand Tool

Clipping path service, Clipping path service provider, Clipping path services, Clipping path Service Company, Remove background from image, Image editing company, Photo editing company, Photo editing services, Photo retouching services

Remove background from image Use Magic Wand Tool

Today i’m going to show you How to Use Magic Wand tool in adobe Photoshop cs5.

The Magic Wand tool by far one of the simplest,most basic tools in Photoshop for isolating an image.

Wand Tool:

I’m gonna introduce you to where it’s at it W on the shortcut key and it’s look like here in your tools palette. Just Click on magic wand will have one magic wand symbol here and you can just clicking around and magically selecting things wherever you like.

removebackwind-1-min

New Selection:

When you click background which isn’t difficult to do it on if you click. you’ll notice that the magic wand has selected all the area you choose with a tolerance have 32 which was preset up in the tolerance box. And it’s done a fairly good job.

removebackwind-2-min

Add To Selection:

If it’s missed few parts and those parts can be added in couple of different ways you add them in by going up Add To Selection in your toolbar, And simply add the new areas you want to add. There’s actually a simpler way of doing it.

And different way is change your option and that would be after you made your main selection just hold on the shift key and click the extra areas that you need to change any option. You’ll notice whenever you’re in an deselected area and you press shift, a little plus sign will appear below the magic won allowing you to add to your selection.
removebackwind-3-min

Subtract From Selection:

Conversely you’re already selection and you press alt key and you’ll be giving a negative sign which is subtraction from the current selection.
removebackwind-4-min

Let’s dig into some of the other functions of the magic wand tool real quick. If you want deselect this for ctrl d.

Up here you’ll noticed several options for the magic tool.most I’ve which never get touched using Photoshop. That is the really useful if you know how to adapt them.

Intersect With Selection:

It’s an interesting option that allows to make two different selections that overlapped in your end result is going to be only were the two overlaps that will be your selection. It’s usually not very useful with the magic wand tool.
removebackwind-5-min

Tolerance:

The Tolerance is going to be the variation the color you’re selecting.
removebackwind-6-min

Contiguous: Contiguous is something you can deselect and try this your own click in there, and you’ll notice that is selected all the color in any image, not just in the area you clicked
removebackwind-7-min

This is a really useful feature but be careful because with it deselected if you were to sample all the color in the image. You’ll get anything that falls within that tolerance which might end up cutting out some of your image.

removebackwind-8-min

Sample All Layers:

It’s useful if you’re on a multi-layered document. It didn’t  even register that this back image was there if you you select your current layer.
removebackwind-9-min

If were to  click sample all layers then click again you would then get a selection love that area on all the layers including the ones below and above the picture you working on.
removebackwind-10-min

Lets mask it out just using the mask tool add a layer mask down here at the bottom. And you’ve isolated it and it’s now on a transparent background and it’s really be dropped over into another image.
removebackwind-11-min

How To Remove Background From Image Video

Expert Clipping  is one of the best image editing companyphoto editing services which has a large number of professional image editors working specially for it. These image editors have been selected after examining a lot of different images edited by them and it has been noticed that Image background removing  is one of those areas in which these professional image editors of Expert Clipping are extremely good. As it has already been told that Image background removing is not an easy work to do but in fact it is a very complicated process which involves a great attention and concentration along with a great experience.

Join our FacebookYoutubeGoogle+Twitter page to learn more video

How To Remove Background From Image Part-2

Clipping path service, Clipping path service provider, Clipping path services, Clipping path Service Company, Remove background from image, Image editing company, Photo editing company, Photo editing services, Photo retouching services

How To Remove Background From Image Part-2

Today I’m going to show you how to remove background from image in another way to adobe Photoshop cs5.

Today i’m concentrating on the lasso tool: Lasso tool basically allows to select parts of your image in a freestyle manner. It’s not square, it’s not a circle you actually draw what you want to select. If there some areas that you missed.

background_remove2-1-min

There is an easy way you can go ahead and manipulate that. Zoom in this problem areas.

You can either use the command or control space bar to go to your zoom tool, or even click your zoom tool right down in your tools palette if you choose to.

background_remove2-2-min

And zoom in on  this place that you missed and hold in your option and Alt key. And your lasso tool then get a minus sign by it. Now you need to trace this part that you missed. followed by looping up and basically cutting out the part that you put in that makes any sense.

background_remove2-3-min

Just go ahead and kind of loop up here and come all way back around where you first started right about there and release your mouse button.

background_remove2-4-min

If he was kind of the opposite effect instead of going out. Your lasso tool steel selected and go to hold in shift. Now a plus sign will appear next to your lasso tool.

Just go and start draw where you feel that should be. make sure when you start your connected to your previous selection.

background_remove2-5-min

Just now go and do with the selected and simply go to edit and copy. Or command or ctrl+C.

background_remove2-6-min

And go to your new picture whatever you choose to be. Go to edit and paste or use the command ctrl+V.

background_remove2-7-min

Now go to Layer and click down the flatten image and you successfully completed to remove background from image.

background_remove2-8-min

background_remove2-9-min

This should give you a basic understanding of how to remove  background from image.

We have more coming, so keep an eye out for those hope you guys from this helpful and I’ll see you next time.

 If you want to know more about how to remove background from image previous past (Click Here)

How To Remove Background From Image Video

Expert Clipping  is one of the best image editing companyphoto editing services which has a large number of professional image editors working specially for it. These image editors have been selected after examining a lot of different images edited by them and it has been noticed that Image background removing  is one of those areas in which these professional image editors of Expert Clipping are extremely good. As it has already been told that Image background removing is not an easy work to do but in fact it is a very complicated process which involves a great attention and concentration along with a great experience.

Join our FacebookYoutubeGoogle+Twitter page to learn more video

Remove Background from image Part-1

Remove background from image, Image editing company

Remove Background from image Part-1

The first thing we are going to do is decide who it is that we going to cut out . the simplest way to go about doing this sort of tracing out tricks.

Before you erase using background eraser or there regular eraser you duplicate the layer that way the event that  you make a mistake you can go back and find you original image in a separate layer. Just click on images right and click duplicate layer.

removebackfip1-1

you’ll find the background eraser tool right over here on your tools palette, E for shortcut and you’ll see several options for it.

First the brush option here you can set the Size, Hardness, and spacing. Eraser tools is brush so you can paint with it as one. If you have a tablet you can use pen pressure and stylus wheel.

removebackfip1-2

Here Sampling options for continuous, Sampling once or Sampling Background Swatch.

Simplaing Continuously means: when you paint the background brush the cross hairs in the middle. It will sample everything it touches. The cross hair is always sampling whatever color it’s going over as you paint.

removebackfip1-3

Sampling Once: Click the cross hairs will sample that color and that’s only color it will delete until you let go and click again.

removebackfip1-4

Last Option Sampling Background Swatch: It’s really useful if you need to get precise with what you’re going to delete. when you select this the to be deleted will be sampled off the background swatch. so whatever color is color picker that’s what it will delete to the tune whatever tolerance setting you have chosen. it will only delete background swatch color. Add anything around that color up to the tolerance.

removebackfip1-5

removebackfip1-6

Other Options: The other options Discontiguous, Contiguous and Find Edges.

Discontiguous: when you click and paint you’re going to be erasing any of that color which the brush find. when you roll over that color it will start being deleted immediately.

removebackfip1-7

Contiguous: Contiguous on the other hand is useful in certain cases where you need to be particular. Brush going over some white area outside the section of hair. It’s only deleting inside the section in you, it’s not jumping over the darker areas and deleting outside.

removebackfip1-8

Find Edges: Find edges is useful if you want it to find edges of their hair and not delete them. It’s not making a soft delete here actually locating edges.

removebackfip1-9

Tolerance: Tolerance means that whatever your original sampling color was the higher the tolerance number the more of the surrounding hughes and the color it’s willing to delete.

removebackfip1-10

Protect Foreground color: foreground color is very useful if you do not want to erase foreground swatch color. Again the foreground swatches right down here and the background of course is the behind it.

removebackfip1-11

Let’s go ahead and erasing. You can use a mouse if you want either or brush allows a little more control over it. If you have a tablet you can use a pen that would be great. go to grab your background eraser and just start painting.

 If you want to know more about how to remove background from image it’s next part

Here we include the Video for this article hope you like this.

How to Cutout & reshape a Product Image in Adobe Photoshop Video

Expert Clipping  is one of the best image editing companyphoto editing services which has a large number of professional image editors working specially for it. These image editors have been selected after examining a lot of different images edited by them and it has been noticed that Image background removing  is one of those areas in which these professional image editors of Expert Clipping are extremely good. As it has already been told that Image background removing is not an easy work to do but in fact it is a very complicated process which involves a great attention and concentration along with a great experience.

Join our FacebookYoutubeGoogle+Twitter page to learn more video

How to Cutout & reshape a Product Image in Adobe Photoshop

How to Cutout & reshape a Product Image in Adobe Photoshop

How to Cutout & reshape a Product Image in Adobe Photoshop

Here is very sample and easy step to cutout and reshape a product image. The raw product photo can’t good for uploading website, if some edit then image look perfect. Good product photo increase sells.
Reshaping means editing the shape of a photo object. We usually make a shape more even and/or symmetrical. Through post-editing, we can create the perfect shape as it was intended in the design of the object. Reshaping a photo digitally, with Photoshop techniques such as paths, liquefying, cloning, warping, etc., allows you to photograph an object in a less than perfect shape. During a shoot it is often impossible to model an object perfectly, or it takes a lot of time.
Expert Clipping  is one of the best provided services photo editor, picture editor, edit pictures

Reshaping offers the solution; it saves time and money, and offers better results. Subsequent corrections are also common. This means that incorrectly or unevenly photographed objects don’t have to be reshot. Shaping is done for all possible product groups, industries and sectors. Most common editing for apparel: evening the length of sleeves and/or pant legs, evening the height of shoulders or hips, the smoothing out of the fit. For packaging (food, supermarket): placing objects upright, straightening, evening out, etc.

Today I present you how to cutout / background remove and reshape product photo easily.

Open the image in Photoshop and carefully check what is the worst area in product image. Clipping photo to remove background from image or cutout product photo.

cutout_reshape_expertclipping-1

Press Control+A then all select and again presses control + T, make photo state using ruler.

How to Cutout & reshape a Product Image in Adobe Photoshop Video

cutout_reshape_expertclipping-2
Liquify to remove all bumps and reusable product photo.

cutout_reshape_expertclipping-3

cutout_reshape_expertclipping-4
Using patch tool to remove dust, fold and unwanted area, then product photo show perfect.

cutout_reshape_expertclipping-6

cutout_reshape_expertclipping-7
Open Hue/Saturation using Saturation value enter 5 or 6 then product photo Low perfect color.

How to Cutout & reshape a Product Image in Adobe Photoshop Video

cutout_reshape_expertclipping-8

cutout_reshape_expertclipping-9

cutout_reshape_expertclipping-5

Here we include the Video for this article hope you like this.

How to Cutout & reshape a Product Image in Adobe Photoshop Video

Expert Clipping  is one of the best image editing companyphoto editing services which has a large number of professional image editors working specially for it. These image editors have been selected after examining a lot of different images edited by them and it has been noticed that Image reshaping is one of those areas in which these professional image editors of Expert Clipping are extremely good. As it has already been told that Image reshaping is not an easy work to do but in fact it is a very complicated process which involves a great attention and concentration along with a great experience.

Join our FacebookYoutubeGoogle+Twitter page to learn more video